Prev
I built a wooden cradle to hold the roof off my work table so I could work on it without distorting the roof's shape.
Next
Prev
Still have a gap on each side to fill in.
Front section has been laid up.
I used 1/8" smooth masonite to make a curved form section to close the front of the roof.
I built a wooden cradle to hold the roof off my work table so I could work on it without distorting the roof's shape.
Then I reinstalled the roof top.
I used smooth 1/4" masonite to make forms (forgot to take pictures) for the new sidewalls and applied one intial layer of 1708 fiberglass ioregnated with West System 105 epoxy.
Once in my shop I cut the top of the roof off.
Next
P

I built a wooden cradle to hold the roof off my work table so I could work on it without distorting the roof's shape.

  • Media owner pcg
  • Date added
I built a wooden cradle to hold the roof off my work table so I could work on it without distorting the roof's shape.
Click to expand...
There are no comments to display.

Media information

Category
High top roof
Album
I decided the best course of action for converting to a high top was to remove the roof and then do the modifications in my heated shop. Removal took about two minutes with a recipro saw with carbide blade.
Added by
pcg
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top