Prev
I used smooth 1/4" masonite to make forms (forgot to take pictures) for the new sidewalls and applied one intial layer of 1708 fiberglass ioregnated with West System 105 epoxy.
Next
Prev
I used 1/8" smooth masonite to make a curved form section to close the front of the roof.
I built a wooden cradle to hold the roof off my work table so I could work on it without distorting the roof's shape.
Then I reinstalled the roof top.
I used smooth 1/4" masonite to make forms (forgot to take pictures) for the new sidewalls and applied one intial layer of 1708 fiberglass ioregnated with West System 105 epoxy.
Once in my shop I cut the top of the roof off.
Done. Scary how quick and easy this was!
I decided the best course of action for converting to a high top was to remove the roof and then do the modifications in my heated shop. Removal took about two minutes with a recipro saw with carbide blade.
Next
P

I used smooth 1/4" masonite to make forms (forgot to take pictures) for the new sidewalls and applied one intial layer of 1708 fiberglass ioregnated with West System 105 epoxy.

  • Media owner pcg
  • Date added
I used smooth 1/4" masonite to make forms (forgot to take pictures) for the new sidewalls and applied one intial layer of 1708 fiberglass ioregnated with West System 105 epoxy.
Click to expand...
There are no comments to display.

Media information

Category
High top roof
Album
I decided the best course of action for converting to a high top was to remove the roof and then do the modifications in my heated shop. Removal took about two minutes with a recipro saw with carbide blade.
Added by
pcg
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top