Search results

I did more online research and realized I should not use 3M 5200 for Items that need to be fastened and removed regularly. The Tape is somewhere in btwn in its fast removability. 3M 4000 UV and 4200 fast cure seems to be the easiest to remove. The Job at hand is the mounting of a bimini that...

okay. Now I know. Sounds like it is just what I need. Depending on the temperature, you should allow about 24 hours after you think you're done to tighen again.

The bed-it tape is 1/2" Wide. Many of my fittings are one inch or more in width, case in point the bimini mount I'm about to mount is over 1" wide. How do you handle the tape? Do you double up, stretch it or what? My thoughts are to double it up.

Well that'll be a first. I. never did that but I do drill in forward but gently... You run the drill in reverse to get through the gelcoat to prevent chips. Cracks are a different issue.

Alright that's enough. I'll be using Gin or Vodka, 18 gallons to 1 gallon of dry vermouth to 1 gallon of olive juice. Goes to work in minutes and you don't have to rinse it out. :xlol

Hi Tom, Yes I've done it before but it was yrs ago. I wonder though how deep? I'm assuming only the depth of the Gelcoat as I believe it isn't the fiberglass that is potentially cracking but rather just the gelcoat???

I looked up the MSDS sheets for these products and I'll stick to Kroger, Wegmans or Giant brand bleach. Its manifold times safer for Dermal, ingested and respiratory toxicity. Too many grandkids will visit this boat.

Thanks, Yes I'll Watch that.

The reason I asked about coring is that I'm about to instal a Carver Bimini. The mounting hardware consists of #10 x 1" screws. This would normally be plenty for fiberglass but in this case it be drilled through gelcoat, gelcoat that I don't want to crack. The manufacturer does not call for...

My water tank has set empty for some time. Looking through the archive I've found a number of opinions and recommendations for cleaning, purifying and maintaining the onboard 20 gallon water tank. The following is what I've understood as best practices: 1) add a significant amount of Bleach to...

I'll be installing a Bimini this week. Does anyone know if the tops of the cockpit side decks on our 2004 22 have coring in them?

I scare me...I avoid potentially damaging rotating tools. I looked at the wheel but felt for sure I'd damage the boat...especially if Beer is involved. For my recent boat I carefully pulled the letters off, nudging with old hotel keys. Then I removed the Lion's share of the remaining adhesive...

mstrpo, I'm new to the idea of using a product described of as "tape" for bedding. So I went to a site called marinehowto.com. Seems like cheating....I want to play. While I manage with 5200 and some other polys I do tend to make a mess. Thanks, looks like it was meant for me.

I'll have a look.

When I re-bed I will do it right, I have done it before, but with one exception...I did not remove the core back to twice the size as mentioned. I don't want to do this type of work twice especially when considering the potential damage done when it's done wrong or when it fails. While the old...

I see, they also mentioned to use it to heat the knife blade....a flexibe filet knife may be nice.

I found good info on the Boat US site.

I too am not familiar with a heat gun. How do you employ that in favor of bedding? I use 5200! Never an issue never leaks! People that whine about removal of fixtures/hatches etc. don't know how to use a heat gun! :mrgreen: :roll: :thup

I need to begin the process of re-bedding all the common fixtures on my boat and I'm wondering which type you prefer? Life Caulk, 5200, 4200, 3200 and 2200 (just testing) I've used almost all the above but which would you choose? Now for the Apology: Since joining this group I've read where...

I looked for a boat for two years and wish you luck to find the right one. What do you have now.